This article provides the definitions of the Scan Parameters in the eSignal 12- Advanced GET Scanner article.

Prebuilt Sets
Possible Type I Buy
This identifies issues that are Type I Buy setups, which occur after the Elliott Wave 4 retracement is completed and the uptrend is continued. Click here for a video explaining Type I and Type II trades.
(Elliott Wave 4 (Down)
Oscillatior Pullback Positive
PTI (>35)

Possible Type I Sell
This identifies issues that are Type I Sell setups, which occur after the Elliott Wave 4 retracement is completed and the downtrend is continued.
Elliott Wave 4 (Up)
Oscillator Plullback Negative
PTI (>35)

Possible Type II Buy
This identifies issues that are Type II Buy setups, which means that the Elliott Wave 5 in a downtrend is over, and the trend will turn upward.
Elliott Wave 5 (Down)
Moving Average (6/4 Above)

Possible Type II Sell
This identifies issues that are Type II Sell setups, which means that the Elliott Wave 5 in a uptrend is over, and the trend will turn downward.
Elliott Wave 5 (Up)
Moving Average (6/4 Below)

Buying with the Trend
This identifies issues that are in a Stochastic oversold condition, where the current price action may be close to a bottom. The XTL (Up-Blue) indicates that the trend is beginning to move up. By combining these two parameters statistical odds are increased for a more successful “momentum” buy opportunity.
Stochastic (Below 25)
XTL (Up-Blue)

Selling with the Trend
This identifies issues that are in a Stochastic overbought condition, where the current price action may be close to a top. The XTL (Down-Red) indicates that the trend is beginning to move down. By combining these two parameters statistical odds are increased for a more successful “momentum” sell opportunity.
Stochastic NFB (Above 75)
XTL (Down-Red)

Stochastics Buy
This identifies issues that are in a Stochastic oversold condition, where the current price action may be close to a bottom. A price move holding above a 6/4 moving average may indicate the price is beginning to move upwards and improves the odds of success for a potential buy opportunity.
Stochastic NFB (Below 25)
Moving Average (6/4 Above)

Stochastics Sell
This identifies issues that are in a Stochastic overbought condition, where the current price action may be close to a top. A price move holding below a 6/4 Moving Average may indicate the price is beginning to move downwards and improves the odds of success for a potential sell opportunity.
Stochastic NFB (Above 75)
Moving Average (6/4 Below)

XTL Breakout Up (Blue)
This identifies issues that are just beginning to start an up trend. This can be used on its own, or as an Prebuilt/ Xref Parameter Set to confirm another trading strategy.
XTL (Up-Blue)
XTL(Breakout Bar)

XTL Breakout Down (Red)
This identifies issues that are just beginning to start a down trend. This can be used on its own, or as an Prebuilt Xref Parameter Set to confirm another trading strategy.
XTL (Down-Red)
XTL(Breakout Bar)

Filter 1,2,3 Studies

ADX/DMI
General Description
The ADX is a helpful trend indicator. The Average Directional Movement (ADX) is a momentum indicator developed by J. Welles Wilder. The ADX is designed to measure if a market is trending and to what extent. The Directional Movement Index (DMI) is another momentum indicator developed by Wilder. It is designed to determine whether a trending or non-trending pattern exists in a market.

This indicator measures-- regardless if the direction of price movement is in an up or down trend-- the strength of the trend. The higher the value, the stronger the trend. When the ADX is moving higher, the market is in a trend mode. The trend can be either up or down. The +DMI and -DMI identify which direction the trend is going. When the +DMI is above the -DMI the market is stronger. Conversely, if the -DMI is above the +DMI, the market is weaker. By identifying when the ADX turns up, in either situation (stronger or weaker), a potential beginning point of a trend can be identified. Subsequently, when the ADX keeps turning up, a continuation of a trend can be identified. A setting of 4 may be choppier but will identify more potential opportunities. A setting of 14 smoothes out the signals. Welles Wilder, the developer of the DMI, suggests what he calls the 'extreme point rule'. This rule states, "On the day the +DMI crosses above or below the -DMI, don't take the trade. Just take note of the high or the low of the day.

The ADX-DMI is actually three separate indicators.

1. The ADX indicates the trend of the market. This is typically used as an exit signal.
2. The +DMI measures the strength of upward pressure.
3. The -DMI measures the strength of downward pressure.

ADX Turn Up-4
This identifies issues where the ADX line has just made a turn up from its previous location. The period that the ADX is being calculated on is 4.

The ADX Period number indicates the number of bars to use in the calculation of the ADX

ADX Turn Up-14

This identifies issues where the ADX line has just made a turn up from its previous location. The period that the ADX is being calculated on is is 14.

The ADX Period number indicates the number of bars to use in the calculation of the ADX

+DMI(Above-4)
This identifies issues where the +DMI value is above the -DMI value. The period that the ADX is being calculated on is 4.

The ADX Period number indicates the number of bars to use in the calculation of the ADX

+DMI(Below-4)
This identifies issues where the +DMI value is below the -DMI value. The period that the ADX is being calculated on is 4.

The ADX Period number indicates the number of bars to use in the calculation of the ADX.

+DMI(Above-14)
This identifies issues where the +DMI value is above the -DMI value. The period that the ADX is being calculated on is 14.

The ADX Period number indicates the number of bars to use in the calculation of the ADX.

+DMI(Below-14)
This identifies issues where the +DMI value is below the -DMI value. The period that the ADX is being calculated on is 14.

The ADX Period number indicates the number of bars to use in the calculation of the ADX

Elliott Waves
The simplified version of Elliott Wave theory states that you will have a 5 wave sequence in either an up or down direction, followed by some kind of corrective pattern (most of the time), and then a new 5 wave sequence in the opposite direction.

The Elliott Wave scans are used to identify when issues are in one of the last 3 stages of the 5 wave sequence. The last 3 stages of an overall upward wave sequence are Wave 3 Up , Wave 4 Down, Wave 5 Up. The last 3 stages of an overall downward wave sequence are Wave 3 Down, Wave 4 Up, Wave 5 Down.

Elliott Wave 3 Up
This identifies issues that are currently labeled as Elliott Wave 3 in an overall upward wave direction. The primary usage of this scan is to identify the early stages of this sequence, either to take advantage of the strong upward momentum using “momentum” trading strategies, or to use this information to help prepare in advance for a good Type 1 Buy setup.

Elliott Wave 3 Down
This identifies issues that are currently labeled as Elliott Wave 3 in an overall downward wave direction. The primary usage of this scan is to identify the early stages of this sequence, either to take advantage of the strong downward momentum using “momentum” trading strategies, or to use this information to help prepare in advance for a good Type 2 Sell setup.

Elliott Wave 4 Up
This identifies issues that are currently labeled as Elliott Wave 4 in an overall downward wave direction. The primary usage of this scan is to identify Type 1 Sell opportunities that are setting up.

Elliott Wave 4 Down
This identifies issues that are currently labeled as Elliott Wave 4 in an overall upward wave direction. The primary usage of this scan is to identify Type 1 Buy opportunities that are setting up.

Elliott Wave 5 Up
This identifies issues that are currently labeled as Elliott Wave 5 in an overall upward wave direction. The primary usage of this scan is to identify Type 2 Sell opportunities that are setting up.

Elliott Wave 5 Down
This identifies issues that are currently labeled as Elliott Wave 5 in an overall downward wave direction. The primary usage of this scan is to identify Type 2 Buy opportunities that are setting up.

MACD
The Moving Average Convergence/Divergence (MACD) is an oscillator technique attributed to Gerald Appel. The MACD consists of an oscillator that is the point spread difference between two exponential moving averages with different periods, and a moving average of that oscillator. (An exponential moving average is an average that weighs recent data more heavily at a geometric rate than data from the distant past.) Signals are generated by the relationship of the two values.

The Moving Average Convergence/Divergence (MACD) indicator is used in three variations. MACD is used as an indicator to determine overbought or oversold conditions in a market. MACD can be used to generate signals on line crossovers, and it can generate oscillator divergence signals. It is similar to the RSI and Stochastics in its usage, where divergences between the MACD and prices may indicate an upcoming trend reversal.

The primary MACD usage: When the MACD is increasing, prices are trending higher; when the MACD is decreasing, prices are trending lower. A buy signal is given when the MACD graph is in an oversold condition below the origin and the MACD line crosses above the signal line. A sell signal (negative breakout) is given when the MACD graph is in an overbought condition above the origin and the MACD line falls below the signal line. The important crossovers of the MACD line to the signal line occur far from the zero line (the horizontal axis). The amount of divergence between the MACD line and the signal line is important; the greater divergence, the stronger the signal.

Other ways MACD is used: It is also popular to buy/sell when the MACD goes above/below zero. When the shorter moving average pulls away dramatically from the longer moving average, the price may be overextending, indicating the creation of a possible "overbought/oversold" condition. Divergence analysis is helpful near the end of a current trend when the MACD diverges. A bearish divergence occurs when the MACD is making new lows while prices fail to reach new lows. A bullish divergence occurs when the MACD is making new highs while prices fail to reach new highs. Both of these divergences are most significant when they occur at relatively overbought/oversold levels.

The MACD is said to be effective in wide-swinging trading markets. For more volatile markets, some MACD users may shorten the calculation periods of the exponential moving averages.

MACD Above
This identifies issues where the MACD oscillator of the difference between a 26-period exponential moving average and a 13-period exponential moving average is above the signal line of a 9 period moving average of the oscillator.

MACD Below
This identifies issues where the MACD oscillator of the difference between a 26-period exponential moving average and a 13-period exponential moving average is below the signal line of a 9 period moving average of the oscillator.

MACD Crossed Above
This identifies issues where the MACD oscillator of the difference between a 26-period exponential moving average and a 13-period exponential moving average has crossed above the signal line of a 9 period moving average of the oscillator.

MACD Crossed Below
This identifies issues where the MACD oscillator of the difference between a 26-period exponential moving average and a 13-period exponential moving average has crossed below the signal line of a 9 period moving average of the oscillator.

Moving Averages
A moving average is an indicator that shows the average value of an issue over a specific time period. For example, a six period moving average would take the sum value (often the closing price of the bar) over six days, compute the sum, and divide by six. The longer the length of the moving average, the slower it reacts to the market and, conversely, the shorter the moving average, the more sensitive the moving average will be to a price change.

Some ways moving averages can be used are to “smooth-out” price fluctuations and help emphasis the direction of a trend, if even a minor trend. For example, if a price is above a moving average, speculators and investors tend to buy; if a price is below a moving average, speculators and investors tend to sell.

Moving averages can be displaced, or offset, by a given number of bars – this is called a displaced moving average, or DMA. It is frequently meaningful when the current price crosses the DMA.

For Advanced GET Users:
The “6/4 Moving Average” is the same thing as the “6/4 DMA Channeling” technique, which is referred to in the Advanced GET manual, seminar video tapes, and demo disk. It combines two moving averages, which have slight variations, and says that trend reversal is not complete unless both the moving averages are crossed.

The “6/4 Moving Average Cross Up” scan helps identify those issues that are higher probability candidates for a trend reversal. The 6/4 DMA Channeling technique should be used with a Type 1 or 2 Buy or Sell setup to help confirm that trend reversal. A “6/4 Moving Average Crossing Up” scan is also useful in identifying early Type 1 and 2 Buy signal setups.

To manually create a “6/4 Moving Average” in the Advanced GET program, go to the Moving Average menu, and create two moving averages. Both moving averages will have a “Length” set to “6” and the “Offset” set to “4.” The difference between the two moving averages will be to set one moving average “Source” to “High” and change the color to “Blue;” the other set the “Source” to “Low” and make “Red” the color.

6/4 Moving Average Above
This identifies issues whose current price is above a 6/4 moving average. A 6/4 moving average is a 6 period moving average using the “High” as the sum value, offset by 4 periods. The primary usage of this scan is to confirm buying strategies, such as a Type 1 Buy or a Type 2 Buy.

6/4 Moving Average Below
This identifies issues whose current price is below a 6/4 moving average. A 6/4 moving average is a 6 period moving average using the “Low” as the sum value, offset by 4 periods. The primary usage of this scan is to confirm selling strategies, such as a Type 1 Sell or a Type 2 Sell.

6/4 Moving Average Cross Up
This identifies issues where the current bar has crossed above a 6/4 moving average. A 6/4 moving average is a 6 period moving average using the “High” as the sum value, offset by 4 periods. A crossover of a moving average and the closing prices of the bars on the chart is usually taken as an entry or exit signal.

6/4 Moving Average Cross Down
This identifies issues where the current bar has crossed below a 6/4 moving average. A 6/4 moving average is a 6 period moving average using the “Low” as the sum value, offset by 4 periods. A crossover of a moving average and the closing prices of the bars on the chart is usually taken as an entry or exit signal.

20 Moving Average Above
This identifies issues whose current price is above a 20 period movining average using the close as the sum value.

20 Moving Average Below
This identifies issues whose current price is below a 20 period movining average using the close as the sum value.

50 Moving Average Above
This identifies issues whose current price is above a 50 period movining average using the close as the sum value.

50 Moving Average Below
This identifies issues whose current price is below a 50 period movining average using the close as the sum value.

100 Moving Average Above
This identifies issues whose current price is above a 100 period movining average using the close as the sum value.

100 Moving Average Below
This identifies issues whose current price is below a 100 period movining average using the close as the sum value.

200 Moving Average Above
This identifies issues whose current price is above a 200 period movining average using the close as the sum value.

200 Moving Average Below
This identifies issues whose current price is below a 200 period movining average using the close as the sum value.

Oscillator Pullback
This identifies issues whose 5/35 Oscillator is pulling back to zero. The pullback to zero is defined as a retracement of the oscillator to between 90 & 140% from it's peak during Elliott Wave 3. The primary usage of this scan is to signify the end of the Elliot Wave 4.

Oscillator Pullback Negative
This identifies issues whose 5/35 Oscillator is pulling back to zero. The pullback to zero is defined as a retracement of the oscillator to between 90 & 140% from it's peak during Elliott Wave 3. The primary usage of this scan is to signify the end of the Elliot Wave 4.

This identifies issues whose 5/35 Oscillator is pulling back to zero from the Negative direction.

Oscillator Pullback Positive
This identifies issues whose 5/35 Oscillator is pulling back to zero. The pullback to zero is defined as a retracement of the oscillator to between 90 & 140% of the previous oscillator. The primary usage of this scan is to signify the end of the Elliot Wave 4.

This identifies issues whose 5/35 Oscillator is pulling back to zero from the Positive direction.

PTI
PTI is a proprietary indicator designed to help identify if “normal” profit taking is going on in a major Wave 4 pullback. Wave 4 corrections are “profit taking” sequences. A Wave 4 pullback is considered a higher probability trade setup because if the Wave 4 pullback maintains control, it will lead most often to a major Wave Five completion of that five wave sequence. The key is the profit-taking must be “normal” and the PTI is one important indicator that helps gauge that Wave 4 profit-taking action.

PTI> 35
This identifies issues with a Profit Taking Index (PTI) greater than 35, which is the minimum value for normal profit taking in a Wave 4.

Regression Trend Channels
A Regression Trend Channel (RTC) is simply the mathematically standard deviation of the linear regression. The RTC is made up of three parallel lines. The center line is a linear regression. This center line is bracketed by two additional lines that represent the standard deviation of the linear regression price data. The RTC is calculated using the actual prices of the bars in the trend.

How to Use RTC:
The break of a RTC represents a change in trend or a change in bias and so can be used as an entry or exit signal.

In many ways it is similar to a moving average. The difference with the RTC there is there is no lagging the linear regression trendline and, secondly, it is helpful because it often identifies a change in trend or bias more quickly than a moving average.

Terms: A linear regression trend line is the straight-line mathematical measurement of the relationship between sets of price data that plot out as a trend line. More simply, a linear regression trend line is a straight line that best fits a set of points. With bar charts the points used to calculate the trend line can be derived in many different ways. For example they can based on the high, low, or midpoint of the bars.

A standard deviation is a measure of the dispersion of a frequency distribution that is the square root of the arithmetic mean of the squares of the deviation of each of the class frequencies from the arithmetic mean of the frequency distribution. What is important for our purposes is that one standard deviation from the mean captures 68% of all observations and two standard deviations captures 95% of all observations (assuming normal distribution).

Regression Trend Channels (Break Down)
Identifies isIdentifies issues where the current price is below the lower channel. The lower channel is positioned 2 standard deviations below the linear regression trend line. The linear regression trend line is based on the "H-L" flip of the bars from the last primary or major pivot - which means the low point of the bars is used for an up trend, and the high point of the bars are used are used in a down trend.

Regression Trend Channels (Break Up)
Identifies issues where the current price is above the upper channel. The upper channel is positioned 2 standard deviations above the linear regression trend line. The linear regression trend line is based on the "H-L" flip of the bars from the last primary or major pivot - which means the low point of the bars is used for an up trend, and the high point of the bars are used are used in a down trend.

Stochastic
The Stochastic indicator is a momentum indicator developed by George Lane. It is designed to indicate when the market is “overbought” or “oversold.” Lane’s premise is that when a price increases, the closing prices tend to move toward the daily highs and, conversely, when a market’s price decreases, the closing prices move toward the daily lows.

A Stochastic indicator is plotted as two lines, the “%K” line and “%D” line. %K is calculated by finding the highest and lowest point in a trading period and then finding where the current close is in relation to that trading range. %K is then smoothed with a moving average. %D is a moving average of %K. Stochastic uses a range scale of 0 to 100. Any move of the %K and %D line above 80 (some use 75) is considered approaching an “overbought” condition, where the price is close to a top. Any move of the %K and %D line below 20 (some use 25) is considered approaching an “oversold” condition, where the price is close to a bottom.

A general sell signal is generated when you have a crossover of the %K and the %D when both are above the band set at 80 (or 75). A general buy signal is generated when you have a crossover of the %K and the %D when both are below the band set at 20 (or 25). A more reliable signal occurs when the %K and %D has already turned from the extreme to the direction of the new trend when that %K and %D crossover takes place.

The are a few general observations about the Stochastic indicator: (1) the %K line will often change direction before the %D line, but when the %D line changes direction prior to the %K line, a slow and steady reversal may often be expected; (2) when both %K and %D lines change direction and the faster %K line subsequently changes direction to retest a crossing of the %D line but does not cross it, stability of the prior reversal may occur; (3) when a strong move is underway and the indicator reaches its extremes around 0 and 100, a following pullback often retests these extremes, and provides a better buy or sell signal; (4) Many times, when the %K or %D lines reaches the extremes of the 0 to 100, and it begins to flatten out, it makes it harder to identify when the next trend will occur.

Stochastic Above 75
This identifies issues where the Stochastic (set at a 21 period %K = 3% and %D = 3) lines are above 75. A Stochastic reading above 75 is considered approaching an “overbought” condition, where the current price action may be close to a top.

Stochastic Below 25
This identifies issues where the Stochastic (set at a 21 period %K = 3% and %D = 3) lines are below 25. A Stochastic reading below 25 is considered approaching an “oversold” condition, where the current price action may be close to a bottom.

False Bar
The False Bar is a proprietary indicator that looks to improve on trading signals given by the Stochastic indicator. If the Stochastic indicator is giving an overbought or oversold situation these signals are not valid if the False Bar is present. In Advanced GET, these bars are displayed graphically on the Stochastic study as a bar either above or below the Stochastic lines.

Stochastic NFB Above 75
This identifies issues where the Stochastic (set at a 21 period %K = 3% and %D = 3) lines are above 75. A Stochastic reading above 75 and no False Bar is present is considered approaching an “overbought” condition, where the current price action may be close to a top.

Stochastic NFB Below 25
This identifies issues where the Stochastic (set at a 14 period %K = 3% and %D = 3) lines are below 25. A Stochastic reading below 25 and no False Bar is present is considered approaching an “oversold” condition, where the current price action may be close to a bottom.

XTL
The XTL (eXpert Trend Locator) is a study developed by Tom Joseph that uses a statistical evaluation of the market. The XTL is designed to tell the difference between random market swings (noise) and directed market swings (trends).

The XTL is a simple but powerful tool that is not complicated to use. When there is no major trend, the bars are plotted as regular bars in black (no trend). As soon as a potential trend is detected, the color of the bar is changed to Red (downtrend) or Blue (up trend). If the bars are blue in color, then the trend is up. If the bars are red in color, then the trend is down. The first bar to change from a regular bar to an up trend or downtrend is called a breakout bar.

XTL Breakout Bar
This identifies issues that are potentially changing into a new trend, and that may be in the early stages of a new up trend or downtrend.

Because these types of setups can happen quickly-- depending on the time frame you are analyzing -- using this scan selection can save valuable time. It can help improve an XTL breakout trading opportunity by allowing you to use this extra time to further investigate the real risk-verses-reward potential using other Advanced GET tools and studies, Type 1 or 2 Buy or Sell techniques or methodologies

XTL Down
This identifies issues that are currently in a XTL downtrend. The primary usage of this scan is to identify either the early stages of a downtrend or an existing downtrend.

When used in conjunction with Elliott Wave analysis, the most valuable use for the XTL is to identify the early stages of a Wave 3 type rally or decline. Elliott Wave analysis alerts the user of a potential change-in-trend, and the XTL detects or identifies this change-in-trend. Since the XTL is a Statistical model and does not use Elliott Wave logic, it provides an independent confirmation and early entry tool for Wave 3 type swings. Thus, the combination of Elliott Wave analysis and the XTL provides the added luxury of both anticipating and confirming the trend.

XTL Up
This identifies issues that are currently in a Blue XTL up trend. The primary usage of this scan is to identify either the early stages of an up trend or an existing up trend.

When used in conjunction with Elliott Wave analysis, the most valuable use for the XTL is to identify the early stages of a Wave 3 type rally or decline. Elliott Wave analysis alerts the user of a potential change-in-trend, and the XTL detects or identifies this change-in-trend. Since the XTL is a Statistical model and does not use Elliott Wave logic, it provides an independent confirmation and early entry tool for Wave 3 type swings. Thus, the combination of Elliott Wave analysis and the XTL provides the added luxury of both anticipating and confirming the trend.

Start Here

Current Products

Important Information & Updates

Customer Service & Billing

General Troubleshooting

Technical Analysis Dictionary

Quotes & Data

Legacy Products

Have Questions?